ProCurve Switch 2510G-24 and SNMP

[Hajo Kumschlies]

Hi,

where can I change the Port for my SNMP Traps?
I do not get any traps.

Hajo

[bolli]

Hello Hajo,
have you configure an SNMP-Server?

Connect to the CLI:
configure
snmp-server

here you find any commands you need to configure.

Regards

[Hajo Kumschlies]

Yes,

i´ll show you

[bolli]

Can you reach the SNMP Server via ping?

[Hajo Kumschlies]

yes,

it´s alive

[bolli]

And you have enable snmp and the communitys are the same on the server and on the switch?

[Hajo Kumschlies]

I tested it with the attached settings and tehy are received.

[bolli]

Try to enable the mib

[bolli]

Sorry. Here is the command
configure
snmp-server mib hpSwitchAuthMIB included

[Hajo Kumschlies]

Hi,

the result:

Invalid input: mib