Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

ProCurve Switch 2510G-24 and SNMP

 
Frequent Advisor

Re: ProCurve Switch 2510G-24 and SNMP

snmp-server host all /serveraddress
Frequent Advisor

Re: ProCurve Switch 2510G-24 and SNMP

Maby you must install the switch mip on the SNMP Server

Re: ProCurve Switch 2510G-24 and SNMP

OK, but how can I do this?

And the error was on the switch, can it recognize so fast that the right mib is missing on the server?

Re: ProCurve Switch 2510G-24 and SNMP

snmp-server host all /serveraddress

does not function

Re: ProCurve Switch 2510G-24 and SNMP

Snmp Response Pdu Source-IP Information

Selection Policy : rfc1517


what does this mean?
Frequent Advisor

Re: ProCurve Switch 2510G-24 and SNMP

RFC 1517 is CIDR (classless inter domain routing)

On one of my 2510G Switches the command

conf
snmp-server host all SERVERIP

works.

What kind of firmware have you installed?

Re: ProCurve Switch 2510G-24 and SNMP

Version: Y.11.08, ROM N.10.02

Re: ProCurve Switch 2510G-24 and SNMP

SWGE122(config)# snmp-server host all 10.25.10.34
Incomplete input: 10.25.10.34
Frequent Advisor

Re: ProCurve Switch 2510G-24 and SNMP

Now put the subnetmask behind the ip and it works. you can also write the subnetmask in CIDR (255.255.255.0 = /24)

Re: ProCurve Switch 2510G-24 and SNMP

OK,

what does this command cause?