Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

ProCurve Wireless Controller - J9001A - Web-Auth - Certification issue with the CGI script

Björn Andreas Höfer
Occasional Advisor

ProCurve Wireless Controller - J9001A - Web-Auth - Certification issue with the CGI script

Hi,

we want to open up a public network for our visitors, with a custom web-page and a few things.

My problem is, if I enable the web-auth for the wlan, everyone get a certificate-error when they try to logon.

The certificate was issued over the cli - because it works better for me...

When the logon-dialog pops up the users get a warning - because the startup-page points to an ip-adresse (e.g.: https://192.168.0.1/blabla) - when I created the certificate-request i also used the option "ip-address" but it won't work.

I've created the certifiacte request with the following commands:
rsakeypair mykeypair (self created 2048 Bit)
ip-address 192.168.0.1
subject-name fqdn.bla.bla.com XY Anywhere Anywhere Companyname IT
then i enrolled the request and got back the cert from our provider???

Did I forget a command or anything else?

Thx in advance

Bjoern
1 REPLY
Björn Andreas Höfer
Occasional Advisor

Re: ProCurve Wireless Controller - J9001A - Web-Auth - Certification issue with the CGI script

Sorry - once again - wrong category...