Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Problem with SNMP v.3 with HP ProCurve 2650B

SOLVED
Go to solution
Plamen Ivanov
Occasional Advisor

Problem with SNMP v.3 with HP ProCurve 2650B

Hello,

I have a weird problem with HP ProCurve 2650B switch. Model is J4899B, ROM H.08.02, SW 10.45.

I connect it to ProCurve manager and everithyng works fine. But when I tried to make a secure connection via SNMP v.3, nothing works. I have tried with deafault user "initial" - nothing. I create several users with long or short names, long or short passwords, complex or not. The same. I have tried all combination of security protocols. Still the same. It gives me error, that username or passord in SNMPv3 are wrong and I need to check credentials. With SNMP v1/2 no problems.

Any ideas?

Thank you in advance.
4 REPLIES
Tore Valberg
Trusted Contributor
Solution

Re: Problem with SNMP v.3 with HP ProCurve 2650B

Hi

Your software is very old. I would first make sure to upgrade it to H.10.83. But be sure to read the release notes! I suspect you will have to upgrade in steps, as the version gap is soo big.

Tore
Tore Valberg
Trusted Contributor

Re: Problem with SNMP v.3 with HP ProCurve 2650B

Forgot to add a link.

http://h10144.www1.hp.com/customercare/support/software/summarypages/h-j4900-c.htm

I see in the release notes there are multiple snmpv3 related fixes.

Tore
Plamen Ivanov
Occasional Advisor

Re: Problem with SNMP v.3 with HP ProCurve 2650B

Thank you very much Tore! It works fine.
Plamen Ivanov
Occasional Advisor

Re: Problem with SNMP v.3 with HP ProCurve 2650B

Thank you to people who help others!