HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Procurve 2524 : poor performance after upfrade

 
Louis-Steve
Occasional Contributor

Procurve 2524 : poor performance after upfrade

Does anyone upgrade a Procurve 2524 with the last firware available.

After the upgrade the switch can only transfer to 25% of the bandwith.

I've done the test before and after the upgrade. I can reproduce the problem. When I get back to the older firware, the tranfert goes up to 80% of the bandwith.

Thank for your help

Louis-Steve
1 REPLY
Mark Landin
Valued Contributor

Re: Procurve 2524 : poor performance after upfrade

Please state specifically what firmware you WERE on, and which one you UPGRADED to.