HPE Community
Switches, Hubs, and Modems
1753261 Members
5000 Online
108792 Solutions
New Discussion юеВ

Re: Procurve 2610 VLAN Voice

 
PEI_1
Advisor

тАО02-07-2011 01:26 AM

тАО02-07-2011 01:26 AM

Procurve 2610 VLAN Voice

Hi,

switch1(config)#vlan 10
switch1(vlan-10)#name voice
switch1(vlan-10)#voice

Can someone advise the purpose of voice option for vlan as above?

Thanks
Pei
0 Kudos
2 REPLIES 2
EckerA
Respected Contributor

тАО02-07-2011 09:52 PM

тАО02-07-2011 09:52 PM

Re: Procurve 2610 VLAN Voice

Hi,
the voice commands enables lldp-med on the vlan.

hth
alex
0 Kudos
cenk sasmaztin
Honored Contributor

тАО02-13-2011 01:46 PM

тАО02-13-2011 01:46 PM

Re: Procurve 2610 VLAN Voice

you can use QoS
type of service or L2 QoS for the voip comminication

my advice use ToS
priority for voice port

for example
qos tcp-port 554 dscp 101110
qos type-of-service diff-services
cenk

0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.