Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Procurve 2610 interface total rx errors increasing

Kevinz_1
Occasional Visitor

Procurve 2610 interface total rx errors increasing

Our customer reported performance turning down with a connection to our Procurve 2610-48 switch. We checked the interface which the customer is connected to. It looks strange that the number of 'Total Rx Errors' is increasing but we don't see any other errors. Can you advise what's the reason causing the 'Total Rx Errors'?

By the way, the version of 2610 is R.11.16.

Here's the info of interface 42.

MHS-ultra-sw19# sh int 42

Status and Counters - Port Counters for port 42

Name : John Oladehinde
Link Status : Up
Totals (Since boot or last clear) :
Bytes Rx : 661,387,411 Bytes Tx : 2,404,783,164
Unicast Rx : 115,800,681 Unicast Tx : 132,995,984
Bcast/Mcast Rx : 2,721,860 Bcast/Mcast Tx : 20,683,101
Errors (Since boot or last clear) :
FCS Rx : 0 Drops Rx : 0
Alignment Rx : 0 Collisions Tx : 0
Runts Rx : 0 Late Colln Tx : 0
Giants Rx : 0 Excessive Colln : 0
Total Rx Errors : 145,642 Deferred Tx : 0
Rates (5 minute weighted average) :
Total Rx (bps) : 1291648 Total Tx (bps) : 1394048
Unicast Rx (Pkts/sec) : 413 Unicast Tx (Pkts/sec) : 463
B/Mcast Rx (Pkts/sec) : 0 B/Mcast Tx (Pkts/sec) : 4
Utilization Rx : 00.10 % Utilization Tx : 00.11 %