Community
Switches, Hubs, and Modems
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Procurve 2824 default management IP

 
David Heiert
Advisor

‎11-12-2009 07:16 AM

‎11-12-2009 07:16 AM

Procurve 2824 default management IP

Does anyone know the IP address that these switches use on the web management side after a reset using the front panel controls?

I knew it at one time, but cannot remember and did not write it down. A search on the web has proven fruitless. Many references to the rest procedure, but none to the IP address.
0 Kudos
Reply
2 REPLIES 2
Jeff Carrell
Honored Contributor

‎11-12-2009 11:20 AM

‎11-12-2009 11:20 AM

Re: Procurve 2824 default management IP

there is no default ip addr on 2824...

after factory reset, vlan 1 defaults to dhcp client, so if you connect 2824 to a network w/dhcp services, you can look in that dhcp srvr lease table for the 2824 mac addr and find the assigned ip addr, then web to it...

hth...jeff
0 Kudos
Reply
David Heiert
Advisor

‎11-12-2009 11:30 AM

‎11-12-2009 11:30 AM

Re: Procurve 2824 default management IP

Yeah, I found that out but I got in with a serial connection. Thanks.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.