Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Procurve 2824 default management IP

David Heiert
Advisor

Procurve 2824 default management IP

Does anyone know the IP address that these switches use on the web management side after a reset using the front panel controls?

I knew it at one time, but cannot remember and did not write it down. A search on the web has proven fruitless. Many references to the rest procedure, but none to the IP address.
2 REPLIES
Jeff Carrell
Honored Contributor

Re: Procurve 2824 default management IP

there is no default ip addr on 2824...

after factory reset, vlan 1 defaults to dhcp client, so if you connect 2824 to a network w/dhcp services, you can look in that dhcp srvr lease table for the 2824 mac addr and find the assigned ip addr, then web to it...

hth...jeff
David Heiert
Advisor

Re: Procurve 2824 default management IP

Yeah, I found that out but I got in with a serial connection. Thanks.