Procurve 2848 Vlan Routing

[cenk sasmaztin]

:D

you can write on internet router below routing command

172.27.0.0 255.255.0.0 172.27.1.10
172.28.0.0 255.255.0.0 172.27.1.10
**************************************************

[Anakonda]

Thanks,

i'll try tomorrow.

i'll also add this network to our ISA server.

[Anakonda]

I have created a network on our ISA.

From my pc (172.28.1.5) which is connected to the vlan 2 port 27 i can not ping the network on vlan 1. and i can not internet.

I have attached the latest screenshot of my Procurve config.

[EckerA]

Hi Rene,
you don't need those last two routes.
just remove them and try again.
alex

[cenk sasmaztin]

I want cry Rene

please you read be carefull

Rene

****************************************************
SWICH ONLY HAVE ONE ROUTING COMMAND
0.0.0.0 0.0.0.0 172.27.0.254
****************************************************




*****************************************************
YOU CAN WRITE THIS COMMAND ONLY INTERNET ROUTER

172.27.0.0 255.255.0.0 172.27.1.10
172.28.0.0 255.255.0.0 172.27.1.10
*****************************************************


*****************************************************
So you can use isa server on system

isa server connect vlan 1 untag port and assign ip address
vlan 1 subnet 172.27.3.x

and delete all routing command ......

and you can write
ip default gateway 172.27.3.x (isa lan ip address)

good luck

[Anakonda]

Please don/t cry :-)

Now i can ping the gateway. (ISA: 172.27.0.254)
From ISA i can also ping the 172.28.1.0 subnet.

On the ISa i have added this route:

172.28.0.0 255.255.0.0 172.27.1.10

I haven't still no access to the internet.

The client ipconfig:

IP: 172.28.1.6
NetMask: 255.255.0.0
GW: 172.28.1.10

DNS1: 172.27.0.11
DNS2: 172.27.0.12

[cenk sasmaztin]

hi Rene please send me

last sh run print and network map

please..:)

[Anakonda]

Hi,

Thanks for the quick response:

[EckerA]

Hi Rene,
your switch config is fine. no need to change anything there!
first i would try to ping the dns servers and make a nslookup for some url.
then there might be some firewall rules on your isa server not allowing your new vlan to reach the internet. but with isa servers i am out. don't know how to configure it.
good luck
alex