HPE Community
Switches, Hubs, and Modems
1753269 Members
5156 Online
108792 Solutions
New Discussion

Procurve 2900 routing between subnets

 
SOLVED
Go to solution
Colin Benson
Advisor

‎09-19-2007 09:35 PM

‎09-19-2007 09:35 PM

Procurve 2900 routing between subnets

I need to create a second subnet on my network to cope with a number of new PCs.

Am I going to have to VLAN the network or can I somehow creating routing between them using the 2900 - ??

thanks
Colin
0 Kudos
1 REPLY 1
Mohieddin Kharnoub
Honored Contributor

‎09-20-2007 06:55 AM

‎09-20-2007 06:55 AM

Solution

Re: Procurve 2900 routing between subnets

Hi

With the 2900 switch you can subnet your network into 256 Vlans, each one in a different subnet.
And you can enable routing between them on that switch.

Check this helpful link:
ftp://ftp.hp.com/pub/networking/software/2900yl-MRG-0207-T_12_XX-Chap03-IP-Routing.pdf

Good Luck !!!
Science for Everyone
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.