Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Procurve 2910 MAC-BASED vlan(s). computers don't recieve an IP from DHCP right away

groque
Frequent Advisor

Procurve 2910 MAC-BASED vlan(s). computers don't recieve an IP from DHCP right away

Hi all,

I am having an issue with my ProCurve 2910 specifically in regards to MAC-BASED VLAN(S).

For example - I have a computer that belongs to VLAN 10 and its currently shut off.

The computer plugs into port 1 on my switch. When I turn it on and check my show port-access mac-based I can see the VLAN get assigned to 10 but it doesn't receive an IP address right away, I have to log on and do a ipconfig /release and /renew in order to grab the IP.

Does anybody have any advice or a solution to this problem. I would like to get my computers to grab an IP address as soon as possible without doing an ipconfig /release and /renew

Thanks for the support