Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Procurve 420, VLAN and Freeradius

Jérémy
Occasional Visitor

Procurve 420, VLAN and Freeradius

Hi,

I try to use VLAN on a HP Procurve 420.
The main idea is to have 2 VLAN, a secure one with WPA, and a opened one (without any security).
As I understood, the process for auth. may be:
- a station which try to authenticate itself on the AP have two issues: auth. succeed and data will be tagged with the id defined on the freeradius server for the logged user, auth. failed and data will be tagged with the id defined for the default user.
- a station which doesn't try to authenticate itself on the AP will be automaticaly tagged with the default vlan id defined on the HP 420.

I think this can be possible but I'm not sure.I'm looking for someone who have already done that.
Any help would be greatly appreciated (case study, configuration examples...)

Regards,

Jeremy
2 REPLIES
Jeff Brownell
Valued Contributor

Re: Procurve 420, VLAN and Freeradius

dont know off the top. please log a call to address
SCOOTER
Esteemed Contributor

Re: Procurve 420, VLAN and Freeradius

I agree with Jeff, call support they might have some good exaples for you to check out.

The direct telephone access number for ProCurve support from France is 0826-020121.

Regards,

SCOOTER