Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Procurve 5304 Vlan routing

Roberto33
Occasional Advisor

Procurve 5304 Vlan routing

I got three switches Procurve 5304 and one 2512

I set four VLAN’s on all switches with those IP’s

Switch 1 (Main)
VLAN10 192.168.10.1
VLAN20 192.168.20.1
VLAN30 192.168.10.1
VLAN40 192.168.10.1

Switch 2
VLAN10 192.168.10.2
VLAN20 192.168.20.2
VLAN30 192.168.10.2
VLAN40 192.168.10.2

Switch 3
VLAN10 192.168.10.3
VLAN20 192.168.20.3
VLAN30 192.168.10.3
VLAN40 192.168.10.3

Switch 4
VLAN10 192.168.10.25
VLAN20 192.168.20.25
VLAN30 192.168.10.25
VLAN40 192.168.10.25

All my servers are connected to switch 1 (Main). On two of my server I Installed Kerio WinRoute Firewall, the first to access the Internet and the other to access a Remote LAN through a Modem HDSL.
 Internet Server has the network interface with IP 192.168.10.4
Server to access the remote LAN has the network interface with IP 192.168.10.11.

On my switch 1 (Main) I created the following static route:
0.0.0.0/24 192.168.10.4
10.0.0.0 / 8 192.168.10.11

(At the moment all my host's are assigned to VLAN10 and everything working nicely).

I enabled the IP routing on all the switches, I assigned the gateway to the hosts for their own VLAN, but I’m not able to ping host's in different VLAN's. Finally I enabled the GVRP, now I can ping hosts' from vlan20 to vlan10 but not vice versa, and especially I’m not able to ping servers with Kerio installed (192.168.10.4 and 192.168.10.11) by vlan20, 30.40.

What's wrong? Do you have any other suggestions to complete this VLAN routing?

Any kind of suggestion will be appreciated.

Roberto33

3 REPLIES
cenk sasmaztin
Honored Contributor

Re: Procurve 5304 Vlan routing

this is imposible ROberto
Switch 1 (Main)
VLAN10 192.168.10.1
VLAN20 192.168.20.1
VLAN30 192.168.10.1
VLAN40 192.168.10.1

vlan 10 ,vlan 30 and vlan 40 same ip address

VLAN10 192.168.10.2
VLAN20 192.168.20.2
VLAN30 192.168.10.2
VLAN40 192.168.10.2
this is imposible

please send me switch 1 sh run print
cenk

Roberto33
Occasional Advisor

Re: Procurve 5304 Vlan routing

this is my main switch running config.

Thanks Roberto.
Roberto33
Occasional Advisor

Re: Procurve 5304 Vlan routing

I'm sorry, I made a mistake writing IP's, of course the VLAN30 and 40 on all switches have 192.168.30.x and 192.168.40.x

Sorry for that Roberto