HPE Community
Switches, Hubs, and Modems
1752807 Members
5979 Online
108789 Solutions
New Discussion

Procurve 5400 memory leak

 
Pewo
Occasional Contributor

‎08-10-2009 07:46 AM

‎08-10-2009 07:46 AM

Procurve 5400 memory leak

Hello!

We have aprox 7 Procurve5406/5412 switches.
On two of these we loose about 11 bytes of memory per second. This has been seen on both K.13.63 and K.13.51. When memory comes down to about 10Mb, the switch reboots with some messages saved to the log...

I 08/10/09 04:56:33 00063 system: System went down: 08/10/09 04:52:18
I 08/10/09 04:56:33 00061 system: ----------------------------------------------
M 08/10/09 04:52:18 sys: 'NMI event SW:IP=0x009cb480 MSR:0x00029210 LR:0x004128d8 Task='tDevPollRx' Task ID=0x89b9c10'


The switch is one of our core switches and runs OSPF and VRRP for less than 40 VLAN's

Slot Module Description
----- ----------------------------------------
A ProCurve J8706A 24p SFP zl Module
D ProCurve J8708A 4p 10G CX4 zl Module
E ProCurve J8708A 4p 10G CX4 zl Module
F ProCurve J8708A 4p 10G CX4 zl Module
I ProCurve J8707A 4p 10-GbE zl Module
J ProCurve J8707A 4p 10-GbE zl Module
0 Kudos
1 REPLY 1
Pewo
Occasional Contributor

‎08-10-2009 08:30 AM

‎08-10-2009 08:30 AM

Re: Procurve 5400 memory leak

I will create a support case for this instead...

Sorry for taking your time.

/Peter
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.