Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Procurve 5412zl routing... help please

apaustex
Occasional Visitor

Procurve 5412zl routing... help please

Evening,

I am trying to get routing configured on our new 5412zl and am having issues. The syntax just doesn't make sense to me coming from a different environment, and I KNOW I have missed something. However, staring for hours has revealed nothing. This switch is still in a test environment that is modeled after our production VLANs.

I have a SonicWALL firewall at A1 (10.2.0.2, VLAN 29) that the switch can ping out to the internet from while telnetted in. I can also ping a PC I have on the switch at C1.

This PC can ping all of the procurve's VLAN IP interfaces as well as those of Cisco 3508's downstream A21 and B21. However, this PC cannot ping the firewall IP at A1 and cannot get out to the internet. I am bringing a second PC over to test inter-VLAN routing tomorrow, but I wanted to post in case you all notice something wrong with the attached config.

Thanks in advance,

Jim



I can ping any host telnetted to the switch and out to the internet. However, any PC connected is unable to ping beyond the VLAN IPs on the 5412.
2 REPLIES
Jeff Carrell
Honored Contributor

Re: Procurve 5412zl routing... help please

1) does the f/w have a return route of 10.2.0.1 to those networks on the 5406?

That sounds like the issue.

Since the 5406 is in the 10.2.0.0 network, the f/w knows how to get back to it.

hth...Jeff
apaustex
Occasional Visitor

Re: Procurve 5412zl routing... help please

Commenter was correct, the firewall did not have the return route properly set.