Switches, Hubs, and Modems
1748169 Members
4202 Online
108758 Solutions
New Discussion юеВ

Procurve 5496 switch - odd port statistics problem

 
Lemmy Kilmister
Occasional Advisor

Procurve 5496 switch - odd port statistics problem

Hi,

I'm running a 5496 as my main core. I've been noticing some rather odd behavior with the port statistics.

I log into the switch via telnet, and lookup a port (show int j15 for example). I get the port information with a bunch of drops showing.

I issue the command clear statistics j15, go back into the port view, and the counters are all back to zero.

i log out, log back in, the error port count has gone exactly to the previous count. I can do this over and over again with the same result.

running K.14.41

any ideas?
2 REPLIES 2
Mohammed Faiz
Honored Contributor

Re: Procurve 5496 switch - odd port statistics problem

Hi,

This was supposed to be fixed in one of the K13. releases.
I've just tried in on one of our 5406's running K14.41 and it does the same.
If you run a "clear stat global" that will permenantly reset all the port counters.
zmichl
Advisor

Re: Procurve 5496 switch - odd port statistics problem

Funny, I have the same problem. I am going to search the forum before I start a new thread next time :) http://forums13.itrc.hp.com/service/forums/questionanswer.do?threadId=1411102