Switches, Hubs, and Modems
Showing results for 
Search instead for 
Did you mean: 

Procurve 9300

Procurve 9300


I am trying to assign a default-gateway to a vlan on a procurve 9300. The command appears documented on the manuals but when I try to use it the switch return the 'Unrecognized Command' error. How can I set the default gateway for a specific VLAN?

Any help will be appreciated.
Carsten M
Regular Advisor

Re: Procurve 9300

Hallo Carlos!

A 9300 with many vlan is the same as router with many router interfaces.
The Default Gateway is the "last way" for unknown destinations for the vlans.
The default-gateway command is not for a specific vlan.
I think you should work with static route entries and filter.

Good luck