Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Procurve 9308

Lars Voss Jacobsen_1
Occasional Contributor

Procurve 9308

Hi there,

I have a senario with 2 9308´s both with firmvare 07.6.04ct53.
They have both a J4140 10/100 24 port module and it's those that's my problem.
I have a ton of errors on them, they perform normaly but it worries my with all these errors.
I have attached a part of the result from a show tech.

Kind regards

Lars Jacobs
3 REPLIES
Ardon
Trusted Contributor

Re: Procurve 9308

Hi Lars,

This is a known (and only cosmetic problem) with 7.06.04c code in combination with your used modules. The behavior can only be seen at 10/100 ports.
I have a newer code available which is to big to mail from the forum so I will send it in a minute over regular email.

Thanks, Ardon
ProCurve Networking Engineer
Ardon
Trusted Contributor

Re: Procurve 9308

Lars,

Your email address would be helpfull:-)

Ardon
ProCurve Networking Engineer
Lars Voss Jacobsen_1
Occasional Contributor

Re: Procurve 9308

Hi Ardon,

My mail address is : fslvj@it.stam.dk

Thank you

Lars