Procurve Default routing

[Sethuram]

It's not 10.21.21.254. Its 10.21.23.254. It is in a different location and connected through a 4Mb link. From the switch 10.21.21.249 I can ping this IP. This is the HP switch at the other end. I cannot ping from the laptop connected to the vlan7 / port b16.

[Mohammed Faiz]

Your static route for 10.21.23.254 points to 10.21.21.254

"ip route 10.21.22.0 255.255.254.0 10.21.21.254"

I'm trying to picture where this lies.
I've not really come across a setup where traffic is routed a second within the same subnet.

[Gerhard Roets · Accepted solution]

Hi Sethuram

Well interisting issue you have one quick thing.

I suspect your default route is not working 100%. You might want to review that.


Since all the clients are plugged into vlan 7 which is the management vlan and as per the procurve Advanced Traffic Management Guide is not routable. This is bound to be your issue.

HTH

[Sethuram]

Hi Gerhard,

This resolved all my problems. Thanks a ton.