Procurve Manager+ 2.3, Mobility Manager and Radio 210 devices

[Stewart P]

Hi, I have PCM+2.3 and Mobility Manager installed on my network.

Procurve sees all my switches fine. I also have Mobility Manager installed with 100 licences but I cannot see any of my 210 Radio devices. My PCM+ server is on a 10.1.1.0 (255.255.252.0) range and my wireless network is on 10.1.12.0 range. Is this going to be the problem?

I basically dont know whether Im doing it right, whether it should just pick them up automatically or I should enable something to see thwm first.

Any tips would be greatfully received. All my switches and wireless and VLANS are all working fine, I just cant see my wireless devices.

Thanks

[cenk sasmaztin · Accepted solution]

please test and say me result
you can ping test pcm server to wireless adge servis zl or xl module.

cenk

[Stewart P]

Ah...

No, I cannot ping this! Is there some settings on it that will allow it to be configured from a different network? I can configure other servers on other networks and also ping other things on this network so I know my routing is working.

Any ideas anyone??

Thanks

[cenk sasmaztin]

you can say reside pcm server(10.1.1.0) and wireless network (10.1.12.0)different network
and not succesfully ping (icmp)between networks
is this true ?

[Stewart P]

I have reolved the ping issue now. My radio ports have still not appeared in Procurve, but I will give it the weekends to see if they appear.

Thanks for your help

[cenk sasmaztin]

check wireless adge service module default gateway address
check pcm server default gateway address