Procurve Manager : Nothing in IP authorized manager tab

[Mario Gauthier_1]

I did a quick check to the log file but it's hard to read. I will take more time later on when I capture the packets

[Mohamed Hamedi]

If you'd like to post the log file and i can look at it for you.
What I would do;
1-Re-start the PCM server (this will create a new log file)
2-run the client and only scan that 9304
3-then post \server\logs\CFG-CfgMgr.log

[Mario Gauthier_1]

ok I'm busy right now. I will do it later on tonight. In about 2 hours from now.

[Mario Gauthier_3]

Here is the file

can see the TFTP timeout but why?

I have no TFTP server running in back for sure and...

[Mohamed Hamedi]

Actually there is an tftp server running in PCM to software updates and configuration pulls.

I am not very familiar with the 9304 but is it possible that you configured the box somehow stopping tftp configuration transfer to PCM?

Basically the log is saying that PCM waited for the 9304 to send it the config file and it didn't.

One thing to try loggin in the 9304 and frmo the command line send the configration file to the PCM server.

[Mario Gauthier_1]

Yes I know PCM have a TFTP server running. I mean I don't have anyother running in the backgound. And yes I can do a TFTP from the box to the PCM. I will check to remove some command from box to test it