Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Procurve Stacking Options

Procurve Stacking Options

HI, I just want to know how to configure stacking options on procurve edge switches. We have a number of switches per floor and I want to have a stack name for each floor. How do I create a stack commander and join other switches. Thanks!
4 REPLIES
Matt Hobbs
Honored Contributor

Re: Procurve Stacking Options

Either through the web interface or using the CLI 'Menu' command, stacking is very easy to configure.

From the web interface you can set a stack commander under the configuration tab.

Close your web browser then go back to the same switch and you should see a stacking menu at the top of your web browser. You can then go to stack management and add other switches to the stack.

Re: Procurve Stacking Options

Can you teach me configuring it on CLI?
Matt Hobbs
Honored Contributor

Re: Procurve Stacking Options

I recommend you read that chapter in the manual:

ftp://ftp.hp.com/pub/networking/software/AdvTraff-Oct2005-59908853-Chap08-Stacking.pdf

Don't forget to assign points.

Re: Procurve Stacking Options

Okay Thanks!