Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Procurve Wireless Accesspoint 10ag unstable

Frank Rasmussen
Occasional Visitor

Procurve Wireless Accesspoint 10ag unstable

Hi

We have sold a lot of 10ag accesspoints running at different customers. These run in different environment (wpa-psk, wpa-tkip via IAS)

Our common problem is that the Access points Randomly stops serving clients. We still have access to the management interface and the log. The log shows clients connecting and leaving nearly at the same time apearently whitout any errors, but they don't stay connected.

When we reboot the devices, they work normally again. We have updated to the latest firmware (.003) acording to HP support's suggestion.

Can it be, that theese AP's are unstable?

Any suggestions?

Regards
Frank Rasmussen