Procurve change telnet connection mode MENU -> CLI

[Jayd]

Hi gentlemen,

When I establish a telnet or ssh connection to half of my switches a configuration menu appears instead of the standard CLI. (like if you use the menu command at the prompt)

In the past I was aware of a command to disable this behavior. I need to log directly at the CLI interface because of Procurve Manager that don't like this menu stuff..

Can someone remind me the command?

Many thanks ;o)
JD.

[KSimpson · Accepted solution]

I had this problem also. I never could find the cli command but you can change it in the menu. Hopefullly, you don't have to many that are this way. If you enter the menu, select 8) Run Setup and change the default logon. All you need to do is change it to CLI and not Menu.

Hope this helps.

[KSimpson]

Or the CLI command "setup" will take you there. It's the same thing.

[Jayd]

Excellent! I'll try & let you know.

[Jayd]

Works like a charm! thank you!