Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Procurve change telnet connection mode MENU -> CLI

SOLVED
Go to solution
Jayd
Advisor

Procurve change telnet connection mode MENU -> CLI

Hi gentlemen,

When I establish a telnet or ssh connection to half of my switches a configuration menu appears instead of the standard CLI. (like if you use the menu command at the prompt)

In the past I was aware of a command to disable this behavior. I need to log directly at the CLI interface because of Procurve Manager that don't like this menu stuff..

Can someone remind me the command?

Many thanks ;o)
JD.
4 REPLIES
KSimpson
Frequent Advisor
Solution

Re: Procurve change telnet connection mode MENU -> CLI

I had this problem also. I never could find the cli command but you can change it in the menu. Hopefullly, you don't have to many that are this way. If you enter the menu, select 8) Run Setup and change the default logon. All you need to do is change it to CLI and not Menu.

Hope this helps.


KSimpson
Frequent Advisor

Re: Procurve change telnet connection mode MENU -> CLI

Or the CLI command "setup" will take you there. It's the same thing.
Jayd
Advisor

Re: Procurve change telnet connection mode MENU -> CLI

Excellent! I'll try & let you know.
Jayd
Advisor

Re: Procurve change telnet connection mode MENU -> CLI

Works like a charm! thank you!