Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Procurve port mirroring

Marco A.
Esteemed Contributor

Procurve port mirroring

Hi,

What is the process to mirror ports for sniffing in procurve?

I don't have the mirror-port commands, but I have the "mirror" command available.

What is the syntax ? thanks,

Marco
Just unplug and plug in again ....
3 REPLIES
Marco A.
Esteemed Contributor

Re: Procurve port mirroring

I think I found the answer... just to confirm

Let's say ...following syntax.

mirror 1 port 11 --> this is, mirroring sessions 1 (4 possible sessions), and the EXIT port is the 11 (I thought the 11 was the source, my bad) , so ... If I want to monitor the port 21, I have to perform the following command.

----> interface 21
-------> monitor
-That will send the data to the port 11, so I can connect a pc to this port to sniff all the traffic.

I think that the rigth process.

Thanks,
Marco,
Just unplug and plug in again ....
Marco A.
Esteemed Contributor

Re: Procurve port mirroring

--- sorry ---

To monitor:
At the interface mode.
monitor all both mirror 1 ---> to send the data in/out to the mirror 1

Marco,
Just unplug and plug in again ....
Marco A.
Esteemed Contributor

Re: Procurve port mirroring

Thanks !
Just unplug and plug in again ....