QoS for a subnet?

[Schmidi76]

Hello,
I have installed several 5406zl switche. Now I try to configure QoS for a complete netaddress, for example 192.168.1.0/24. But I don´t know how?
Could somebody help?

[abdullah shboull]

Suppose you have vlan 100, then in the global mode type (vlan 100 qos priority 7), which the priority from 0-7 and the highest one is 7 is the highest priority.

[Michael_Breuer]

Hello,

yes, easieast way is to do it based on the VLAN ID. Then you can classify your traffic based on the VLAN ID and put it in a high priority queue. If you have an 802.1Q uplink the priority will be retained to the uplink switch. You just need the command mentioned by Abdullah.

Cheers,

Michael

[Schmidi76]

Hello,
thank you for your answers. My network constellation is a little bit different. So it looks like: 5406zl <-> VPN(Cisco) <-> 5406zl
The cisco switch does not support VLANs and so I lost all VLAN informationen. But I will gurantee, that my Voice VLAN (ID:100) always be prefered. Well, I set DSCP to 011110 for VLAN 100 (Voice). Is this correct or would you change something?

[abdullah shboull]

please sign a point if we helped you in your case