- Community Home
- >
- Networking
- >
- Legacy
- >
- Switches, Hubs, Modems
- >
- Re: Qos For voip packets on 2610
Switches, Hubs, and Modems
1745956
Members
4229
Online
108723
Solutions
Forums
Categories
Company
Local Language
юдл
back
Forums
Discussions
Forums
- Data Protection and Retention
- Entry Storage Systems
- Legacy
- Midrange and Enterprise Storage
- Storage Networking
- HPE Nimble Storage
Discussions
Discussions
Discussions
Forums
Forums
Discussions
юдл
back
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
- BladeSystem Infrastructure and Application Solutions
- Appliance Servers
- Alpha Servers
- BackOffice Products
- Internet Products
- HPE 9000 and HPE e3000 Servers
- Networking
- Netservers
- Secure OS Software for Linux
- Server Management (Insight Manager 7)
- Windows Server 2003
- Operating System - Tru64 Unix
- ProLiant Deployment and Provisioning
- Linux-Based Community / Regional
- Microsoft System Center Integration
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Blogs
Information
Community
Resources
Community Language
Language
Forums
Blogs
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО11-29-2009 10:22 PM
тАО11-29-2009 10:22 PM
Qos For voip packets on 2610
I have configured a 2610-24 pwr switch for using avaya ip phones as well as pcs.Even i have configured vlans and qos as following my ipo 500 showing jitter and delay while making some outside calls.I would like to make sure my config is correct.Pls do suugest if any modification needed.
; J9087A Configuration Editor; Created on release #R.11.30
hostname "DulscoSW1"
max-vlans 50
time timezone 240
no qos-passthrough-mode
console baud-rate 9600
console inactivity-timer 15
ip routing
snmp-server community "public" Unrestricted
vlan 1
name "NMS"
untagged 25-28
ip address 192.168.0.1 255.255.255.0
qos priority 0
no untagged 1-24
exit
vlan 2
name "Data"
untagged 3-24
ip address 192.168.7.254 255.255.255.0
qos priority 0
tagged 25-28
exit
vlan 3
name "Voice"
untagged 1-2
ip address 192.168.3.254 255.255.255.0
qos priority 6
tagged 3-28
exit
qos type-of-service ip-precedence
ip route 0.0.0.0 0.0.0.0 192.168.7.1
spanning-tree
password manager
; J9087A Configuration Editor; Created on release #R.11.30
hostname "DulscoSW1"
max-vlans 50
time timezone 240
no qos-passthrough-mode
console baud-rate 9600
console inactivity-timer 15
ip routing
snmp-server community "public" Unrestricted
vlan 1
name "NMS"
untagged 25-28
ip address 192.168.0.1 255.255.255.0
qos priority 0
no untagged 1-24
exit
vlan 2
name "Data"
untagged 3-24
ip address 192.168.7.254 255.255.255.0
qos priority 0
tagged 25-28
exit
vlan 3
name "Voice"
untagged 1-2
ip address 192.168.3.254 255.255.255.0
qos priority 6
tagged 3-28
exit
qos type-of-service ip-precedence
ip route 0.0.0.0 0.0.0.0 192.168.7.1
spanning-tree
password manager
3 REPLIES 3
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО12-01-2009 12:11 PM
тАО12-01-2009 12:11 PM
Re: Qos For voip packets on 2610
hi my create two config for you
my first config
with this config
packets have to port 5060 will be route with high priority
this is L3 priority
hostname "DulscoSW1"
max-vlans 50
time timezone 240
console baud-rate 9600
console inactivity-timer 15
ip routing
snmp-server community "public" Unrestricted
vlan 1
name "NMS"
untagged 25-28
ip address 192.168.0.1 255.255.255.0
no untagged 1-24
exit
vlan 2
name "Data"
untagged 3-24
ip address 192.168.7.254 255.255.255.0
tagged 25-28
exit
vlan 3
name "Voice"
untagged 1-2
ip address 192.168.3.254 255.255.255.0
tagged 3-28
exit
qos tcp-port 5060 dscp 101110
qos udp-port 5060 dscp 101110
qos type-of-service diff-services
ip route 0.0.0.0 0.0.0.0 192.168.7.1
spanning-tree
password manager
-----------------------------------------------------------------
my second config
when connect ip phone 3-13 interface (must have vlan 3 taging interface and
complate tagging set on ip phone) this device packet have hight priority travel on network
this is L2 QoS
hostname "DulscoSW1"
max-vlans 50
time timezone 240
console baud-rate 9600
console inactivity-timer 15
interface 3
qos priority 7
exit
interface 4
qos priority 7
exit
interface 5
qos priority 7
exit
interface 6
qos priority 7
exit
interface 7
qos priority 7
exit
interface 8
qos priority 7
exit
interface 9
qos priority 7
exit
interface 10
qos priority 7
exit
interface 11
qos priority 7
exit
interface 12
qos priority 7
exit
interface 13
qos priority 7
exit
ip routing
snmp-server community "public" Unrestricted
vlan 1
name "NMS"
untagged 25-28
ip address 192.168.0.1 255.255.255.0
no untagged 1-24
exit
vlan 2
name "Data"
untagged 3-24
ip address 192.168.7.254 255.255.255.0
tagged 25-28
exit
vlan 3
name "Voice"
untagged 1-2
ip address 192.168.3.254 255.255.255.0
tagged 3-28
exit
ip route 0.0.0.0 0.0.0.0 192.168.7.1
spanning-tree
password manager
each methot you can test and examine with wireshark packet analizer
my first config
with this config
packets have to port 5060 will be route with high priority
this is L3 priority
hostname "DulscoSW1"
max-vlans 50
time timezone 240
console baud-rate 9600
console inactivity-timer 15
ip routing
snmp-server community "public" Unrestricted
vlan 1
name "NMS"
untagged 25-28
ip address 192.168.0.1 255.255.255.0
no untagged 1-24
exit
vlan 2
name "Data"
untagged 3-24
ip address 192.168.7.254 255.255.255.0
tagged 25-28
exit
vlan 3
name "Voice"
untagged 1-2
ip address 192.168.3.254 255.255.255.0
tagged 3-28
exit
qos tcp-port 5060 dscp 101110
qos udp-port 5060 dscp 101110
qos type-of-service diff-services
ip route 0.0.0.0 0.0.0.0 192.168.7.1
spanning-tree
password manager
-----------------------------------------------------------------
my second config
when connect ip phone 3-13 interface (must have vlan 3 taging interface and
complate tagging set on ip phone) this device packet have hight priority travel on network
this is L2 QoS
hostname "DulscoSW1"
max-vlans 50
time timezone 240
console baud-rate 9600
console inactivity-timer 15
interface 3
qos priority 7
exit
interface 4
qos priority 7
exit
interface 5
qos priority 7
exit
interface 6
qos priority 7
exit
interface 7
qos priority 7
exit
interface 8
qos priority 7
exit
interface 9
qos priority 7
exit
interface 10
qos priority 7
exit
interface 11
qos priority 7
exit
interface 12
qos priority 7
exit
interface 13
qos priority 7
exit
ip routing
snmp-server community "public" Unrestricted
vlan 1
name "NMS"
untagged 25-28
ip address 192.168.0.1 255.255.255.0
no untagged 1-24
exit
vlan 2
name "Data"
untagged 3-24
ip address 192.168.7.254 255.255.255.0
tagged 25-28
exit
vlan 3
name "Voice"
untagged 1-2
ip address 192.168.3.254 255.255.255.0
tagged 3-28
exit
ip route 0.0.0.0 0.0.0.0 192.168.7.1
spanning-tree
password manager
each methot you can test and examine with wireshark packet analizer
cenk
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО12-02-2009 12:11 AM
тАО12-02-2009 12:11 AM
Re: Qos For voip packets on 2610
Dear Cenk,
Thanks for you reply.
I would like to ask you that yuor first configuration will be applicable for even single switch deployment.bcs i have only single switch and 22 ip phones are connected(port 3-24).and pcs are connected through ipphones.so i feel your first config will be suitable for me and second will not work out,since both are conected to same port?please correct me if am wrong...
hope no other config required apart form you suggested?
looking for kind reply.
Thanks for you reply.
I would like to ask you that yuor first configuration will be applicable for even single switch deployment.bcs i have only single switch and 22 ip phones are connected(port 3-24).and pcs are connected through ipphones.so i feel your first config will be suitable for me and second will not work out,since both are conected to same port?please correct me if am wrong...
hope no other config required apart form you suggested?
looking for kind reply.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО12-02-2009 02:13 AM
тАО12-02-2009 02:13 AM
Re: Qos For voip packets on 2610
hi
did you test any config ?
first config and secont config good for you
I realize you have single switch
first config for prioritize 5060 port (sip port) on your switch
secont config prioritize tagged interface
your ip phone connect switch interface this interface tagged for voip vlan and untagged data vlan for pc
L2 port priority already running on only tagged interface
please make test
did you test any config ?
first config and secont config good for you
I realize you have single switch
first config for prioritize 5060 port (sip port) on your switch
secont config prioritize tagged interface
your ip phone connect switch interface this interface tagged for voip vlan and untagged data vlan for pc
L2 port priority already running on only tagged interface
please make test
cenk
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.
News and Events
Support
© Copyright 2024 Hewlett Packard Enterprise Development LP