Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Question regarding SNMP and 2848

SOLVED
Go to solution
Alexander Samad
Frequent Advisor

Question regarding SNMP and 2848

Hi

I need a way to look at the mac addresses associated with a particular port on a procurve 2848. I have had a quick look at the spec's for a 2848 and seen all the rfc's it complies to, I had a quick look and nothing is spring out.

Is it possible, can I find out what machines/mac is associated with say port1 etc

Thanks
3 REPLIES
Alexander Samad
Frequent Advisor

Re: Question regarding SNMP and 2848

I found this in the manual

walkmib ifPhysAddress

which I can run on the switch, how do I translate this to running from an external machine can I do something like

snmpwalk router ifPhysAddress
Matt Hobbs
Honored Contributor
Solution

Re: Question regarding SNMP and 2848

Hi Alexander,

Have a look through this, should work for you on any switch:

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a00801c9199.shtml

Matt
Alexander Samad
Frequent Advisor

Re: Question regarding SNMP and 2848

as per previous replay