Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Radius Authentication on 2524 / Privilege Level

joe77
Occasional Advisor

Radius Authentication on 2524 / Privilege Level

Hi all,

i try to configure radius authentication on a ProCurve 2524. The logon works without any problems but it is not possible to specify the privilege level. This config is working fine on my 53xx and 54xx Switches..
The switch config is:

aaa authentication console login radius local
aaa authentication telnet login radius local
aaa authentication telnet enable radius
radius-server timeout 1
radius-server host x.x.x.x key xxx

The IAS Service-Type for operator is: NAS Prompt
The IAS Service- Type for Manager is: Administrative

Any ideas ? Thanks !
1 REPLY
networkjedi
Occasional Contributor

Re: Radius Authentication on 2524 / Privilege Level

Hi there,

 

Realise this is a post from quite a long time ago but wondered if you ever managed to get AAA with privilege levels working on a 2524 model? 

 

With this one, the privilege-level command is not present so it's very difficult but would be interested if you found a work-around?

 

Thanks

NJ