HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Radius using Procurve 2610 and EAP/TLS

 
mike.parsons
Occasional Visitor

Radius using Procurve 2610 and EAP/TLS

Equipment:
Procurve 2610 switches
Microsoft Network Policy Server on windows2008R2 as Radius server

Application:
Secure management of procure switches.

We have configured our switches to allow us to authenticate to AD through our radius server running on Windows 2008R2 (Network Policy Server). Our question is how to configure the switch and NPS to communicate using a secure protocol instead of PAP which passes credentials in the clear.

Can anybody assist, please?
1 REPLY
boziah
Advisor

Re: Radius using Procurve 2610 and EAP/TLS

I am also lookingo for help on this.