Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Remove Banner Page

DavidDCSD
Occasional Advisor

Remove Banner Page

we are creating a config management solution in house, but we keep running into problems with the banner at login. Is there any way to disable it so the telnet session goes straight to a login prompt?
2 REPLIES
Mohieddin Kharnoub
Honored Contributor

Re: Remove Banner Page

Hi

You can use: show banner motd , to display the current banner status

And use :
Switch(config)#no banner motd

Good Luck !!!
Science for Everyone
DavidDCSD
Occasional Advisor

Re: Remove Banner Page

Little misscommunication there. I know about the banner what I'm trying to remove is the Registration page essentially I want the switch to come straight to a prompt when a telnet session connects. Is there any way to disable the reg screen and go straight to a prompt. We have 3 3400's that go straight to a prompt as well as 2 5300's. But all of our 26xx's show that reg page.