Replaced 2524 won't gather stats in PCM+

[Michael Davis_9]

I recently had a 2524 switch lose a couple of ports. Before I removed it from the network, I changed it's IP.

Now I've set up a new 2524, with the original IP of the old bad one, and put it into service. All access and utilities work fine, but it won't show up under Traffic Monitor in PCM+. I have added it to the Traffic Devices page.

The old bad switch is still listed under Inteconnect Devices (it has been unplugged from the network for 2 weeks). It has been removed from any Groups or Traffic Devices list. It will not Delete or Exclude from the Int. Dev. list.

Any ideas would be most appreciated.

[Mohamed Hamedi · Accepted solution]

make sure that discovery is running and then try and delete the device.
Then try do a manual discovery, again while discovery is running.

hope that helps.

-Mohamed

[Michael Davis_9]

That worked beautifully. Thanks!