Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Replacing fan on HP 8000M switch

SOLVED
Go to solution
Neil_77
Frequent Advisor

Replacing fan on HP 8000M switch

Hello, we have a few switches on our network reporting fan failures. The replacement fan trays have been ordered - however, can anyone tell me the procedure for replacing the faulty fan?

Thanks.
3 REPLIES
Stuart Teo
Trusted Contributor
Solution

Re: Replacing fan on HP 8000M switch


1) remove power supply 1

2) remove power supply 2 if u have a
redundant

3) remove Switch Engine Module

4) examining the fan assy, you will see how
it's powered.

5) from the front of the switch, disconnect
the power supply connector

6) unscrew the old fan assy

7) replace with new fan assy
If a problem can be fixed, there's nothing to worry. If a problem can't be fixed, worrying ain't gonna help. Bottom line: don't worry.
Ardon
Trusted Contributor

Re: Replacing fan on HP 8000M switch

Neil,

If you get the new Fan TRays an installation guide should be included. If not please reply and I will supply it to you.

Regards, Ardon
ProCurve Networking Engineer
Neil_77
Frequent Advisor

Re: Replacing fan on HP 8000M switch

Thanks for the info - much appreciated.

I took apart one of our spare switches, just to practise, so I have a good idea whats required now!