Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Reset to default Brocade 4Gb SAN

vBoa
Occasional Visitor

Reset to default Brocade 4Gb SAN

Hi all!

Need to reset Brocade 4Gb SAN Switch for HP c-Class BladeSystem to default config, but have no idea how to do that!

Can anyone help?
3 REPLIES
Taifur
Respected Contributor

Re: Reset to default Brocade 4Gb SAN

Hi VBoa,

Check below link for reset SAN switch in details,

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=3185340&prodTypeId=3709945&objectID=c00791194

If helps, pls assign point.


Rgds//
Taifur
vBoa
Occasional Visitor

Re: Reset to default Brocade 4Gb SAN

I don't find any information how to reset fabric to default, in this doc.

How can i reset all config param to default, including passwords?
Jorge Pons
Trusted Contributor

Re: Reset to default Brocade 4Gb SAN

Hi

go to default values from CLI, but I supposed you don´t have password to access.
This procedure depends from fw version. try:

- Reset switch.
- Keep pressing "ESC" until the prompt show ">"
- in boot mem, type:
>boot Mem()0xF0000000 -s

Then start the switch in maintenance mode

# mount -o remount,rw,noatime /
# mount -a
# /mnt/sbin/passwddefault
# reboot -f

the switch reboot with the default password (see documentation... could be "password")

Regards