Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Routing between Vlan's on a ProCurve 3400cl

Matt_R
Occasional Visitor

Routing between Vlan's on a ProCurve 3400cl

I've been given a HP ProCurve 3400cl to use on an internal development network. This network is isolated and the 3400cl will be the only switch/router on the network. I've created 50 Vlan's to simulate our production environment. What is the easiest way to enable and configure routing between the VLan's? I'm a novice so detailed steps would be a great help.

Thanks!
1 REPLY
Jeff Carrell
Honored Contributor

Re: Routing between Vlan's on a ProCurve 3400cl

need to enable routing - global command 'ip routing' ...

each vlan must have an ip addr in it if you want to route from/to its network(s)...
ex - 'vlan 1 ip address 10.1.1.1/24'

each vlan must have 1 active port for its "network" to be up and routing to occur...

hth...jeff