Routing on the 2650 Switch

[Shiraz Malik]

Hi Martin,

Its only the layer 3 which i need to test on 2650 because I am not sure if it is working fine or not. We currently have to suspected domains
1. 2650 routing
2. netgear's behaviour
Just to narrow down the problem, i have asked Mark to do that exercise.

Because only problem rite now is accessing one VLAN from the other and it actually seems to be nothing other than the routing issue or the netgear's behavior, as specified by you.

I hope you'll now get my point.

Regards,

[Mark Wylie_1]

Hi Guys, got it sorted out in the end. I had neglected to set the gateway on the server side so my ping wasn't able to find a retutrn path.
Thanks for all your help.

Mark

[Mark Wylie_1]

.