Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

SME does not support AT commands

Vishwas Pai
Regular Advisor

SME does not support AT commands

Hi,

I have BlackBox SME-4 for connecting two X.25 interfaces in back-to-back fashion on HP-UX.

For some reason I have to modify some of the
modem configuration using AT commands & store
it in the modem ROM and later connect it back to X.25 interface. For this reason I connected
the modem to one of the serial ports and used
`cu` to get the AT interface. But nothing (none
of the AT commands) seems to be working. Also
when I replace this modem with my MultiTech
modem `cu` takes all the AT commands.

Any idea what might be worng ? What are SMEs
supposed to do ?

TIA - vishwas

to be working
2 REPLIES
Vishwas Pai
Regular Advisor

Re: SME does not support AT commands

Got this reply from comp.dcom.modems by reedh@rmi.net.

--
It appears the SME-4 does not use AT commands.
The only configuration is the speed, controlled
by model# and strap settings.

see http://catalog.blackbox.com/BlackBox/external/10205.PDF
Vishwas Pai
Regular Advisor

Re: SME does not support AT commands

SME does not support AT commands