Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

SNMP CPU Utilization from 3500yl

Pourl
Frequent Advisor

SNMP CPU Utilization from 3500yl

Hi all,

 

I try to get the CPU Utilization of a 3500yl Switch via SNMP. I walked the MIB but if I searched for "cpu" or "util" nothing was found. With google I found repeatedly this string:

 

1.3.6.1.4.1.11.2.14.11.5.1.9.6.1.0

 

But my MIB ends at: 

 

1.3.6.1.4.1.11.2.14.11.5.1.9

 

Do you have an advice for me?

2 REPLIES
EckerA
Respected Contributor

Re: SNMP CPU Utilization from 3500yl

Hi,

 

but it's the correct value...:

 

HP-3500# getmib 1.3.6.1.4.1.11.2.14.11.5.1.9.6.1.0
hpSwitchCpuStat.0 = 0

 

hth

 

Alex

Arimo
Respected Contributor

Re: SNMP CPU Utilization from 3500yl

Hi

 

The correct OID is 1.3.6.1.4.1.11.2.14.11.5.1.9.6.1 (HpSwitchCpuStat). I'd suggest going to https://h10145.www1.hp.com/downloads/SoftwareReleases.aspx?ProductNumber=J8692A and downloading the current MIBs.


HTH,

Arimo
HPE Networking Engineer