Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

SNMP OIDs required

type-r180
Occasional Contributor

SNMP OIDs required

Hi all-

 

I'm trying to get SCOM to monitor port utilisation on our core switches (of which there are 3). I only require one port per switch to be monitored. 

 

For this, I need OIDs. I can calculate throughput and set up thresholds with SCOM, I just need the raw data. 


Has anybody seen an OID database for ProCurve switches? I've tried searching through a MIB, but there's so much data I can't find what I'm after.

 

Any OIDs to do with port throughput is what I'm after.

Kind Regards

Steve 

2 REPLIES
Arimo
Respected Contributor

Re: SNMP OIDs required

Hi Steve

 

Unfortunately there is no MIB reference for the switches. Which OIDs to use depends on your switch model. Support should be able to provide you the OIDs for your device.


HTH,

Arimo
HPE Networking Engineer
type-r180
Occasional Contributor

Re: SNMP OIDs required

Hi Arimo

 

Thanks for your response. I will try another call to support as the tech I spoke to didn't seem to understand what I was asking!

 

Cheers