Switches, Hubs, and Modems
1748094 Members
6059 Online
108758 Solutions
New Discussion юеВ

SNTP time synchronization on HP ProCurve Switches

 
SOLVED
Go to solution
Daniyarik
Occasional Contributor

SNTP time synchronization on HP ProCurve Switches

Hello everyone.
I have this situation in my office:

- 3 ProCurve 2524 Switch and 2 ProCurve 2824 Switch.
- 3 VLANS (default, internet, ip-vlan)
And I can't config this switches to synchronize time from Windows Server 2003 (located in default VLAN).
May be Server 2003 don't hear SNTP?
My configuration commands (in all switches):
____________________________________________
HPSwitch#timesync sntp
HPSwitch#sntp unicast
HPSwitch#sntp server 172.16.10.120 3
____________________________________________
HP Switches have this IP addresses: 172.16.10.10-172.16.10.14
All other configs in default state.
Result: all switches don't synchronize time.

What I do wrong?
If anybody can help?
Thanks for you attention.
3 REPLIES 3
Matt Hobbs
Honored Contributor
Solution

Re: SNTP time synchronization on HP ProCurve Switches

Daniyarik
Occasional Contributor

Re: SNTP time synchronization on HP ProCurve Switches

Hello Matt!
Thanks for you reference.

"HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\TimeProvid
ers\NtpServer

I changed Enabled from 0 to 1"

I do it and everything is synchronized.
Thanks!!!
Daniyarik
Occasional Contributor

Re: SNTP time synchronization on HP ProCurve Switches

Thanks.