SSH problem between PCM3+ and 5406zl

[Shadow13]

There is a new firmware posted on the website K.14.60 with fixes related to SSH, can you try that and check:

â   SSH (PR_0000045158) â SSH login to the switch might fail.

http://www.procurve.com/customercare/support/software/summarypages/k-j8692-c.htm

[Trevor Commulynx]

I am going to apply the code over the weekend and see if it fixes my issue.

I will report back.

[F. SAINT-MICHEL]

Hello Trevor Commulynx,

Have you been able to apply the code last weekend and it solves the problem?

[Trevor Commulynx]

I did not get a chance over the weekend. Hopfully this weekend.

sorry for confusion.

Trev.

[Trevor Commulynx]

Hi All, K.14.60 doesnt fix it.

I keep getting Unkown Username and or password.

as soon as I switch to Telnet, everything works perfectly.

I have logged a call with HP support- tick/tock/tick/tock.....

Anyone else have any luck?

[Javed Padinhakara · Accepted solution]

Hello Michel and Trevor..

there were some recent cases, where banner text characters seems to cause corrpution of the logon session from PCM to switch.

with that background in mind, can you check if these 5406zl switches where you are observing the problem have MOTD banner set?. If so can u disable them (command:no banner motd) and try "Test Comm..." operation?.

let me know how this goes about?

`Javed


ps:Noticed that you have joined recently and hence thought will share an important etiquette followed in the forum - assign points on scale (1-10) to people trying to help by answering your queries; its an appreciation for the time they spend in responding to your questions.

[Trevor Commulynx]

Thanks Javed, I will try the MOTD as I do run it on all the switches being affected.

Also, I have been on these forums for quite some time, just changed jobs and setup new profile. I always give points when someone helps out.

Cheers,

Trevor.

[Trevor Commulynx]

Removing Banner MOTD fixes it.

ProCurve- Fix Required.

Cheers, I cant assign points because I didnt start the thread,

Trevor.

[F. SAINT-MICHEL]

Hi all,

After disabling the "banner motd", the ssh connexion from PCM 3 works fine.

I agree with Trevor Commulynx: An update release of switch firmware or a new patch for PCM would be good.

[Trevor Commulynx]

I have the Patch and it works. Log a call with HP support, it is the CLI patch that has a jar fix in it.

Trev.