SSH2 Session on 2600 Series incorrect credentials

[mwiche]

Hi @ all,

i try to configure ssh2 connections using pcm+ V2.2. I did every step written in manuals and whitepapers. currently i'm trying with an 2626 J4900B running on H.10.35 FW

sh ssh....

SSH Enabled : Yes
SSH Version : 2
TCP Port Number : 22
Timeout (sec) : 120
Server Key Size (bits) : 1024
Secure Copy Enabled : No

I did also the copy tftp pub-key-file ... manager command.

If i run the test communication parameters command in pcm+ i got the message: "Failed: Incorrect Credentials" for Manager and Operator.

What's going wrong?? :-((

[cenk sasmaztin · Accepted solution]

please check on switch and on pcm

manager user name and password
operator user name and password

[mwiche]

thanks for you answer cenk sasmaztin. this works fine but my main problem is the connect by ssh2 using public key auth. sorry, i've forgotten to write this in my initial posting.

i can see the keys that i copied to the switch and i used the "aaa auth ssh enable public-key" command but this didn't work.

[mwiche]

start the thread again with better subject and informations.