Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Set Date and time in HP Procurve Switch

shootingstar29
Occasional Visitor

Set Date and time in HP Procurve Switch

How to set date and time HP Procure 2810 Switch.
I have managed to set the time but not the date.

What CLI command should I type?
3 REPLIES
EckerA
Respected Contributor

Re: Set Date and time in HP Procurve Switch

Hi,

sw1-test-lab-35c(config)# time
begin-date The begin date of daylight savings time
MM/DD[/[YY]YY] New date <----------
daylight-time-rule The daylight savings time rule for your location
end-date The end date of daylight savings time
HH:MM[:SS] New time <----------
timezone The number of minutes your location is West(-) or
East(+) of GMT

sw1-test-lab-35c(config)# time
Tijl van der Steeg
Valued Contributor

Re: Set Date and time in HP Procurve Switch

Als makes sense to configure (s)ntp

"SNTP Server 1.1.1.1"
Shadow13
Respected Contributor

Re: Set Date and time in HP Procurve Switch

use the command as this.
#time month/day/year hr:min:sec
#time timezone
#time daylight-time-rule