Switches, Hubs, and Modems
1748180 Members
3947 Online
108759 Solutions
New Discussion юеВ

Set Date and time in HP Procurve Switch

 
shootingstar29
New Member

Set Date and time in HP Procurve Switch

How to set date and time HP Procure 2810 Switch.
I have managed to set the time but not the date.

What CLI command should I type?
3 REPLIES 3
EckerA
Respected Contributor

Re: Set Date and time in HP Procurve Switch

Hi,

sw1-test-lab-35c(config)# time
begin-date The begin date of daylight savings time
MM/DD[/[YY]YY] New date <----------
daylight-time-rule The daylight savings time rule for your location
end-date The end date of daylight savings time
HH:MM[:SS] New time <----------
timezone The number of minutes your location is West(-) or
East(+) of GMT

sw1-test-lab-35c(config)# time
Tijl van der Steeg
Valued Contributor

Re: Set Date and time in HP Procurve Switch

Als makes sense to configure (s)ntp

"SNTP Server 1.1.1.1"
Shadow13
Respected Contributor

Re: Set Date and time in HP Procurve Switch

use the command as this.
#time month/day/year hr:min:sec
#time timezone
#time daylight-time-rule