Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Setting VLAN indexes on a Procurve 4106

Tim Curless
Occasional Contributor

Setting VLAN indexes on a Procurve 4106

Hi all,
I'm wondering what the easiest way to set VLAN indexes on specific ports through SNMP is on a Procurve 4106. So far the methods I've been using have resulted in the switch losing trunking configurations. Basically I'm wondering which OID to use to set a VLAN index without messing up any other settings. Thanks for any help!