Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Setting trunk group on a j9085A

George_Farcas
Occasional Contributor

Setting trunk group on a j9085A

Hello,

I'm trying to setup a trunk group on two ports on this device but it won't let me. The trunk group that I want to setup is 43, nut it won't let me, only maximum Trk23, i need Trk43

 

I have another device on the network with Trk43 set. It's also a 24 switch but it's a j9145A

1 REPLY
Vince_Whirlwind
Trusted Contributor

Re: Setting trunk group on a j9085A

The 2610 only supports 24 trunk groups.

 

The trunk group ID number does not have to be the same on opposing sides of the trunk.