Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Sflow on Procurve 2610 switches

degcit
Occasional Visitor

Sflow on Procurve 2610 switches

Hello, I have configured Sflow on one of my switches and it seems to be working fine. I'm now trying to configure it on the remaining two switches but it will not let me configure the Polling interval.(setmib 1.3.6.1.4.1.14706.1.1.6.1.4.11.1.3.6.1.2.1.2.2.1.1.53.1 -i 30) or the last one to even able polling (setmib 1.3.6.1.4.1.14706.1.1.6.1.3.11.1.3.6.1.2.1.2.2.1.1.53.1 -i 1) is there a reason why they worked on switch number 1 and not on 2 or 3?
2 REPLIES
degcit
Occasional Visitor

Re: Sflow on Procurve 2610 switches

It outputs: Unable to Create.
netmon
Visitor

Re: Sflow on Procurve 2610 switches

The sFlow MIB is not intended for manual configuration. You will find it much less frustrating if you use a tool like sFlowTrend that uses SNMP to automatically configure sFlow.

http://blog.sflow.com/2009/06/sflow-mib.html