Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Simple VLAN set-up with ProCurve 2510-24?

MR2
Occasional Visitor

Simple VLAN set-up with ProCurve 2510-24?

Hello,

I'd like to set up a very simple VLAN but no luck so far:

24 different VLANs, each having a two ports as members (1-24 and 25), for example VLAN 1 having members port 1 and port 25; VLAN 2 ports 2 & 25 etc. The idea is that each port 1-24 can communicate with port 25 (which is connected to internet) but not with each other.

Is this possible just with the switch or do I need some additional hardware equipment? If it is, how do I do the setup?

Thanks!
1 REPLY
Richard Brodie_1
Honored Contributor

Re: Simple VLAN set-up with ProCurve 2510-24?

It's not easy to do with VLAN but the protected ports feature is designed for this type of setup.

protected-ports 1-24

(might need firmware update if you have old FW installed)